ACCESSORY TABLE ASSY RYOBI - RIDGID A182012002

ACCESSORY TABLE ASSY RYOBI - RIDGID A182012002 Review

List Price:
Sale Price :

>>Compare Price<<

ACCESSORY TABLE ASSY RYOBI - RIDGID A182012002 Overview

ACCESSORY TABLE ASSY

More information Click here!

Related Products

PIVOT TABLE RYOBI - RIDGID 028961000

PIVOT TABLE RYOBI - RIDGID 028961000 Review

List Price: $1.16
Sale Price : $1.16

More detail and Price..Click Here!

>>Compare Price<<

Product Features

• Ridgid/Ryobi
• 28961000
• PIVOT TABLE
• Replacement Part

Related Products

Forrest DH07Q607100 Duraline 7-1/4-Inch 60 Tooth TCG Melamine and Plywood Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor

Forrest DH07Q607100 Duraline 7-1/4-Inch 60 Tooth TCG Melamine and Plywood Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor Review

List Price: $135.00
Sale Price : $68.20

More detail and Price..Click Here!

>>Compare Price<<

Forrest DH07Q607100 Duraline 7-1/4-Inch 60 Tooth TCG Melamine and Plywood Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor Feature

• 20° Face Hook for easy feed
• DOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings.
• Ends second-step finishing (jointing and sanding not required).
• Buy and sharpen ONE blade instead of 3, (24T Rip, 50T Combination, 80T Crosscut).
• Ends cutting 1/16" oversize to allow for RESURFACING

Forrest DH07Q607100 Duraline 7-1/4-Inch 60 Tooth TCG Melamine and Plywood Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor Overview

For radial saws and table saws. These all purpose blades give scratch-free polished cuts on wood. Crosscut up to 2" thick. Rip up to 1" thick. They have a 30 DEG alternate top bevel with a 5 DEG face hook on 10" diameters and smaller. (On 12" diameters and larger - 20 DEG ATB). They are also made with double-hard and 40% stronger #C4 carbide. Thin kerf design saves 1/3 wood loss on each cut, feeds easily when used for moderate rips and crosscuts on a table saw. Eliminates bottom splintering on radial crosscuts. With the new 30 DEG ATB tooth style, this blade stops splintering on ply veneers on both radial saws and table saws.

Related Products

• Forrest WW07Q307100 Woodworker II 7-1/4-Inch 30 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade

DEWALT DW713 10-Inch Compound Miter Saw

DEWALT DW713 10-Inch Compound Miter Saw Review

List Price: $415.52
Sale Price : Too low to display

>>Compare Price<<

DEWALT DW713 10-Inch Compound Miter Saw Feature

• 15 Amp, 5,000 rpm motor delivers extended power and durability
• Stainless steel detent plate with 11 positive stops provides repeatable accuracy and jobsite duability
• Tall sliding fences support crown molding vertically 4-1/2-inch and easily slides out of the way for bevel cuts
• Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
• Cam miter lock for quick and accurate miter table positioning; Miter detent override for fine adjustment and precise miter angles

DEWALT DW713 10-Inch Compound Miter Saw Overview

Whether you're cutting baseboards or crown molding, the DEWALT 10-Inch Single-Bevel Compound Miter Saw provides quick, accurate cuts to complete the job. Thanks to a powerful motor, an easy-to-adjust cam-lock miter handle, convenient miter and bevel stops, and a tall fence for oversized decorative moldings, this compound miter saw is ready for a range of crosscutting and miter-cutting applications. In addition, it comes with a durable carbide blade, a blade wrench, and a convenient dust bag.

10-Inch Single Bevel Miter Saw At a Glance: Powerful 15 amp motor delivers no-load speed of 5,000 rpm Adjustable stainless steel miter detent plate with 11 positive stops Positive bevel stops at 0 and 45 degrees for versatility Tall, sliding fence for cutting crown and base moldings Three-year limited warranty, one-year free service, and 90-day money-back guarantee

This DEWALT Miter Saw has a dependable 15 amp motor that delivers a no-load speed of 5,000 rpm. View larger.

Powerful carbide blade is ideal for cutting baseboards and crown molding. View larger.

Smart, Powerful Design for Quick, Accurate Cuts
The DEWALT single-bevel sliding compound miter saw's 10-inch blade is backed by a powerful and dependable 15 amp motor. Offering a no-load speed of 5,000 rpm, it makes quick work of cutting framing or molding, as well as other crosscutting and miter-cutting jobs.

This sturdy saw is designed to deliver precise cuts and allow versatile setups required for miter applications. The precise miter system's adjustable stainless steel miter detent plate features 11 positive stops for easy setup and improved efficiency. An easy-to-adjust cam-lock miter handle delivers quick and accurate miter angles, and features a convenient detent override, which allows you to adjust the miter setting without the saw slipping into the miter detents. And the saw's big miter capacity-- 0 to 50 degrees to the left and the right--adds versatility.

In addition, a tall fence supports 4-1/2-inch crown molding nested vertically, as well as 6-inch base molding set vertically against the fence. The fence slides out of the way easily when it's time to make bevel cuts.

Increased Bezel Capacity and Convenient Stops
This saw is designed to deliver quick, accurate bevel cuts. You can easily set up for bevel cuts that measure between 0 and 48 degrees to the left and bevel cuts that measure between 0 degrees and 3 degrees to the right. This handy setup provides increased capacity for big jobs. Plus, with positive bevel stops at 0 and 45 and degrees, this saw makes finding and setting the most common bevel angles a quick and easy process.

Ideal for a range of applications, the saw can deliver clean, 45-degree bevel cuts through dimensional lumber that measures up to 2 by 6 inches.

Portable and Compatible with the DEWALT Laser and L.E.D. Systems
This lightweight compound miter saw weighs just 35 pounds and features a built-in carry handle, so you can move it around the jobsite easily and lift it comfortably when it comes time to stow the saw at the end of the day.

For additional accuracy and ease of use, this saw is compatible with the DEWALT DWS7085 L.E.D. (sold separately) work light and cut line indicator or the DW7187 (sold separately) adjustable miter saw laser system. Both accessories ensure the cutting path is clear to see.

This 10-inch single-bevel compound miter saw comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box
DW713 DEWALT 10-Inch Single-Bevel Compound Miter Saw, one carbide blade, blade wrench, and dust bag.

The DEWALT 10-Inch Single-Bevel Compound Miter Saw weighs just 35 pounds and is easy to maneuver around worksites.

More information Click here!

Related Products

• DEWALT DWS7085 Miter-Saw LED Work Light System
• DEWALT DW3106P5 2 Blade 10-Inch 60-Tooth Crosscutting Saw Blade and 10-Inch 32-Tooth General Purpose Saw Blade Combo Pack
• Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• DEWALT DWX723 Heavy Duty Miter Saw Stand
• DEWALT DW723 Miter Saw Stand

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences Review

List Price: $14.99
Sale Price : $10.80

More detail and Price..Click Here!

>>Compare Price<<

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences Feature

• Dual Slide Motion-side to side and forward action for quick and easy setup
• All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences
• Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back
• Split rail miter bar construction-provides maximum hold
• Ergonomic knobs help prevent over-tightening and provides non-slip loosening

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences Overview

The Milescraft Model 1406 FeatherBoard features a dual slide motion design for quick and easy setup as well as a unique pre-load design that allows the appropriate amount of tension to be set consistently. The FeatherBoard includes 3/4-Inch and 5/8-Inch miter bars as well as T-Slot bolts allowing it to be used in nearly any application on router tables and table saws.

Related Products

• Milescraft 1407 D/TFeatherBoard Dual or Tandem FeatherBoards for Router Tables and Table or Band Saws
• Milescraft 3402 PushStick and Depth Gage for Router Tables and Table Saws
• MLCS 9167 Safety Push Block and Stick Package, 5-Piece
• Woodstock W1044 4-to-2-1/2-Inch Reducer
• Bench Dog 10-035 Bench Cookie Work Grippers, 4-Pack

Powermatic PM2000 90th Anniversary Black Onyx Limited Edition 3-Horsepower Table Saw

Powermatic PM2000 90th Anniversary Black Onyx Limited Edition 3-Horsepower Table Saw Review

List Price: $3,180.00
Sale Price : $2,999.99

More detail and Price..Click Here!

>>Compare Price<<

Product Features

• Quick release riving knife greatly reduces binding/kickback risk
• Built-in retractable caster system (patent pending) for immediate shop mobility
• Push button arbor lock (patent pending) for rapid blade change
• Poly-V drive belt system delivers efficient, quiet operation
• Wide stance heavy-duty trunnion for stability and smooth blade positioning

Related Products

Rousseau PM2720 PortaMax 18-Inch by 48-Inch Folding Outfeed Table for PM2600 Table Saw Stand

Rousseau PM2720 PortaMax 18-Inch by 48-Inch Folding Outfeed Table for PM2600 Table Saw Stand Review

List Price: $179.00
Sale Price : $124.88

More detail and Price..Click Here!

>>Compare Price<<

Rousseau PM2720 PortaMax 18-Inch by 48-Inch Folding Outfeed Table for PM2600 Table Saw Stand Feature

• Outfeed support for PM2700D
• 0

Rousseau PM2720 PortaMax 18-Inch by 48-Inch Folding Outfeed Table for PM2600 Table Saw Stand Overview

Position this folding unit anywhere stock support is needed along the back rail of the stand or it's extension. The front edge of the high pressure laminate top is slightly lower than the work surface of the saw stand to prevent thin material from catching and possibly causing it to kick back. Top is 18"x45".

Related Products

• Rousseau 2700XL Saw Stand For Makita 2703, Hitachi C10RA, DeWalt DW744 Table Saws
• Rousseau 2745 PortaMax Table Saw Stand for DeWalt 745 Table Saw
• Rousseau 2715XL Extension with Router Plate (For PM2700XL)
• Rousseau 2775 Table Saw Stand
• DEWALT DW745 10-Inch Compact Job-Site Table Saw with 16-Inch Max Rip Capacity

Bench Dog 10-025 Push-Loc Offset Push Stick For Table Saws, Router Tables with Docking Station

Bench Dog 10-025 Push-Loc Offset Push Stick For Table Saws, Router Tables with Docking Station Review

List Price: $19.99
Sale Price : $17.59

More detail and Price..Click Here!

>>Compare Price<<

Bench Dog 10-025 Push-Loc Offset Push Stick For Table Saws, Router Tables with Docking Station Feature

• Offset handle gets your right hand out of harm's way.
• Ergonomic "no-slip" grip has the best feel.
• Special handle geometry keeps Push-Loc parallel to your rep fence throughout the entire cut.
• Rear tail hook secures Push-Loc to your work piece.
• Rubber sole helps prevent slippage and won't mar your work piece.

Bench Dog 10-025 Push-Loc Offset Push Stick For Table Saws, Router Tables with Docking Station Overview

Our exclusive docking station keeps Push-Loc upright, always ready for use. Now, grabbing your push stick on the go is no longer a problem. The docking station is also a handy pencil tray, and it even holsters up to two tape measures! It gets your hands

Related Products

• Bench Dog 10-035 Bench Cookie Work Grippers, 4-Pack
• Bench Dog 40-011 Feather-Loc Double Featherboard for Table Saws & Router Tables
• Kreg PRS3020 True-FLEX Featherboard - Twin Pack
• Bosch TS1003 Table Saw Left Side Support Extension
• Bosch TS1002 Table Saw Rear Outfeed Support Extension

Bench Dog 40-011 Feather-Loc Double Featherboard for Table Saws & Router Tables

Bench Dog 40-011 Feather-Loc Double Featherboard for Table Saws & Router Tables Review

List Price: $29.99
Sale Price : $22.99

More detail and Price..Click Here!

>>Compare Price<<

Bench Dog 40-011 Feather-Loc Double Featherboard for Table Saws & Router Tables Feature

• Two multipurpose featherboards for holding the stock against the guide fence
• Easy set-up feature; reduces kickback, binding, lifting, and bent blades
• High tech polymer ensures it will maintain its original shape
• Advanced design means no marring to your workpiece
• Designed for 1/4" T-tracks only. Requires Benchdog 10-012 miter slot adapter for miter slots on routers, shapers, band saws, and table saws.

Bench Dog 40-011 Feather-Loc Double Featherboard for Table Saws & Router Tables Overview

The FL200 is a pair of Feather-Loc featherboards without the slot adapter. Buy this if you are using the featherboards on equipment with a 1/4 hex t-track.

Bench Dog 40-011 Feather-Loc Double Featherboard for Table Saws & Router Tables Specifications

A featherboard is undoubtedly the most underrated router-table accessory of all time. When properly installed, its flexible fingers keep the workpiece pressed tightly against the router tabletop or router fence throughout the routing operation. The result is a dramatic increase in the accuracy, quality and safety of the cuts.

Now many woodworkers make their own featherboards from scrap lumber, but here’s a better, safer option: the Bench Dog 40-011 Feather-Loc Double Featherboard. This popular router-table accessory consists of not one, but two industrial-quality featherboards. The featherboards are made from a high-tech polymer and each one has 13 angled fingers that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting.

The featherboards slide into miter-gauge slots in the router table or fence, and are locked in place by tightening a pair of knobs. Note that Feather-Loc Featherboards can also be used on a table saw, shaper, bandsaw or any other woodworking machine with a miter gauge slot. -- Joseph Truini

Related Products

• Bench Dog 10-012 Miter Slot Adapter
• Bench Dog 40-001 ProTop Contractor Benchtop Router Table
• MLCS 9167 Safety Push Block and Stick Package, 5-Piece
• Bench Dog 10-035 Bench Cookie Work Grippers, 4-Pack
• Bench Dog Tools 40-102 ProMax Cast Iron Router Table Extension

Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw

Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw Review

List Price: $24.10
Sale Price : $20.00

Check Price and Promotion Click here!

>>Compare Price<<

Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw Feature

• Table saw insert supports work right up to the blade for smooth, more precise cuts
• Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
• Made from high-density phenolic laminate with a bonded-melamine surface
• Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts
• Leecraft's lifetime warranty; designed for Delta table saw with carbide-tipped blades only

Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw Overview

LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a "kerf" which precisely matches the blade on your saw. These 1/2" thick inserts are precision machined from a nearly frictionless melamine faced, high density phenolic laminate.Offer durability and flatness unobtainable from cheaper plastic inserts.Features like top mounted set screws for precise leveling, front/side adjustment screws for perfect side to side and front to rear fit, and a rear safety pin that keeps the rear of the insert in place, make this the best insert we have ever seen.Sheet stock material (1/2" x 11" x 15") is perfect for creating your own custom jigs and fixtures. Complete with instructions. Insert surface colors may vary.

Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw Specifications

The Leecraft Zero-Clearance Table Saw Insert supports work right up to the blade. With outstanding durability and wear-resistance, it also reduces chip-out and splintering. The zero-clearance concept is simple: the blade cuts its own perfectly sized slot by being raised through a machinable "blank" insert. Made from high-density phenolic laminate with a bonded-melamine surface, the insert is 1/2-inch thick. It offers superior rigidity, flatness, durability, and low friction. Other features include leveling screws, side and end adjustment screws for a vibration-free fit, a rear safety pin for lift-out protection, and a precut blade bottom pocket that provides clearance for fully retracted blades and bevel cuts. Designed for the Delta table saw with carbide-tipped blades only, this insert comes with Leecraft's lifetime warranty.

Related Products

• Micro Jig 1/8" Kerf SteelPRO MJ Splitter Kit (Blue)
• Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor
• DELTA 34-672 Dado Head Table Insert for 10-Inch Table Saw
• Micro Jig Thin Kerf SteelPRO MJ Splitter Kit (Orange)
• Woodstock W1044 4-to-2-1/2-Inch Reducer

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence Review

List Price: $409.14
Sale Price : $258.86

Check Price and Promotion Click here!

>>Compare Price<<

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence Feature

• Table saw that blends incremental angle control and a special 3-panel sled
• Precision angle indexing teeth are laser cut in solid steel
• 364 lock solid angle stops in 1/2-degree increments
• Ten expansion disks adjust both sides of the bar for zero side play
• Hold down clamp locks your work piece onto the sled

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence Overview

Capitalizing on a great idea, the folks a INCRA® have combined their highly successful Miter3000® with the exclusive AngleLOCK® Indexing System with a sled system for the table saw. The sled with T-track and clamping fixture secures the workpiece as one solid unit for precision cross-cutting at any angle. The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that's perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior workpiece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Finally, a perfect cross-cutting system for your table saw! Order the replacement Panel for maintaining zero clearance for different blades and compound angle cutting. Please see above for Miter3000® specifications.

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence Specifications

The Miter 5000 Table Saw Miter Gauge blends the incremental angle control features of the Miter 3000SE with a very special 3-panel Sled for the ultimate miter cutting workstation for the table saw. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cuto-off Fence.

The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that's perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior work piece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Also featured with every Miter 5000 is a simple and incredibly useful hold down clamp which locks your work piece onto the sled for maximum accuracy and the cleanest cuts possible.

Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near-standard miter gauge channels, including Delta, Craftsman, and imports. This means that all of Incra's incredible precision will actually show up in your work because the bar won't wiggle around in the miter slot. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-foot length. The dual flip shop stop and Incra's patented automatic positioning control also come standard with this model. AngleLOCK Indexing Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2-degree increments over a full 180-degree range. Interlocking grooves in the fence and stop ensure even the sharp edge of mitered work will not push behind the stop. The fence locking bracket creates a monolithic rigid platform and fence when tightened down. Quickly set using the included standard hex tool, this feature takes an already strong platform into the rigidity level expected in any professional machining environment.

Related Products

• INCRA Build-It Hold Down Clamp
• Wixey WR300 Digital Angle Gauge
• INCRA Build-It Knobs, 1/4-20 x 1 1/2" Bolts, Washers (Set of 8)
• MLCS 9167 Safety Push Block and Stick Package, 5-Piece
• Porter-Cable 7518 Speedmatic 15 Amp 3-1/4 HP Fixed Base 5-Speed Router

Vega PRO 40 Table Saw Fence System With 42-Inch Fence Bar, 40-Inch to Right

Vega PRO 40 Table Saw Fence System With 42-Inch Fence Bar, 40-Inch to Right Review

List Price: $396.00
Sale Price : $279.99

>>Compare Price<<

Vega PRO 40 Table Saw Fence System With 42-Inch Fence Bar, 40-Inch to Right Feature

• Uses existing hole pattern for Delta Unisaw, Contractor, Powermatic 66, Sears 10-inch saws
• 40-inch right and 10-inch left of blade
• Fence mounting system allows full adjustment for accuracy
• Micro adjustment and aux table support
• Guide rails supported by brackets, 2-1/2-inch fence height

Vega PRO 40 Table Saw Fence System With 42-Inch Fence Bar, 40-Inch to Right Overview

Upgrade your saw to a precise cutting machine at a reasonable price with the Vega PRO 40 Table Saw Fence System. It was specially designed to use the existing bolt holes (no drilling required) of Delta Unisaws and Contractors Saws, Powermatic Model 66 and most Sears 10 in. saws. Little accuracy is needed as the fence mounting system allows full adjustment. Installation may be as little as 15-minutes. (Includes 42-Inch Fence Bar, 40-Inch to Right)Uses existing hole pattern for Delta Unisaw, Contractor, Powermatic 66, Sears 10-inch saws40-inch right and 10-inch left of bladeFence mounting system allows full adjustment for accuracyMicro adjustment and aux table supportGuide rails supported by brackets, 2-1/2-inch fence height

More information Click here!

Related Products

• Leecraft CR-2 Sears Older 10-Inch Belt-drive Zero Clearance Table Saw Insert
• HTC HTC2000 Universal Mobile Base
• Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)
• Oshlun SDS-0842 8-Inch 42 Tooth Stack Dado Set with 5/8-Inch Arbor
• Power Twist V-Belt

Skil 3600-02 120-Volt Flooring Saw

Skil 3600-02 120-Volt Flooring Saw Review

List Price: $296.06
Sale Price : $145.00

Check Price and Promotion Click here!

>>Compare Price<<

Skil 3600-02 120-Volt Flooring Saw Feature

• Portable saw makes accurate cross, miter and rip cuts
• Dual sliding rails provide accuracy and effortless operation during cross and miter cuts
• Miter detents at 0, 22.5 and 45 degrees - most common miter cut angles used in flooring installations
• Innovative locking system secures saw on rails for rip cuts
• Includes : 3600 saw, (1) 75540 4-3/8-inch 40-tooth blade, self-aligning rip/miter fence, blade wrench, clamp, push stick

Skil 3600-02 120-Volt Flooring Saw Overview

Includes 120V Hardwood Flooring Saw - 3600-02, 4-3/8-in 40T Carbide Tipped Blade, Self Aligning Rip/Miter Fence, Blade Wrench, Clamp, Push Stick

Skil 3600-02 120-Volt Flooring Saw Specifications

The portable, multifunctioning SKIL 3600-02 120-Volt Flooring Saw has the ability to make miter, cross, and rip cuts in many types of flooring materials. Designed to cleanly cut through hardwood, laminate, and engineered flooring up to 8 inches wide and 3/4-inch thick, this saw is perfect for all wood flooring projects.

120-Volt Flooring Saw At a Glance: Lightweight and easy to use for DIY wood flooring installations Portable saw makes miter, cross, and rip cuts Cuts hardwood, laminate and engineered flooring up to 8" wide and 3/4" thick Makes angled miter cuts between 0° and 47°; includes 3 common detents Die-cast aluminum miter and rip fence Innovative locking system 40-tooth carbide-tipped blade provides a clean cut

Dual sliding rails provide accuracy and smooth operation during cross & miter cuts. View larger.

This flooring saw's all-in-one design gives you everything you need in one portable, powerful package. View larger.

The 3600-02 makes miter cuts up to 47° and has detents at the angles most commonly used in flooring installations. View larger.

All-in-One Flooring Saw Offers Everything You Need
Tackling a floor installation project usually requires a miter and table saw, each designed for a specific task. However, the SKIL 3600-02 Flooring Saw's all-in-one design gives you everything you need in one portable, powerful package. Saving you time, energy and money, this flooring saw makes accurate cross, miter, and rip cuts.

Whether your installation project takes you to the attic or the basement, this flooring saw goes right along with you, making it a great alternative to larger bench-top tools. Now you can measure, cut, and place your flooring planks without having to get up and walk back and forth to wherever your miter and table saws are set up, which means you can complete your installation in less time. For further convenience, the compact SKIL 3600-02 Flooring Saw offers a built-in cord wrap, a handle for easy portability, and a convenient push stick that stores under the tabletop.

Cleanly Cuts Many Materials
With the ability to rip through hardwood, laminate, and engineered flooring, the SKIL Flooring Saw features a 40-tooth carbide-tipped blade that provides a clean cut without shredding or splintering. Design engineers at SKIL gave this all-in-one tool an aluminum tabletop height of 1-1/2 inches, the same height as a piece of scrap 2x material or two pieces of stacked oak hardwood flooring. This design safely supports extra-long flooring pieces, so they don't bend or tip off the table as you cut. In addition, dual sliding rails keep your material in place to provide accuracy and smooth operation during cross and miter cuts.

Simplifies Miter Cuts
This flooring saw has the capacity to make angled miter cuts between 0 and 47 degrees. Offering built-in miter table-top detents at 0, 22.5 and 45 degrees--the most common miter cut angles used in flooring installations--this flooring saw ensures cutting accuracy for all skill and experience levels.

About SKIL Power Tools
SKIL Power Tools is a leader in portable electric power tools and accessories, serving the consumer, do-it-yourself, and professional construction markets. Founded in 1924 with the invention of the worm drive SKILSAW, SKIL now delivers a complete line of power tools engineered to help do-it-yourselfers achieve home project success, while also providing professionals durable, cost-conscious tools for the jobsite.

What's in the Box
3600-02 120-volt flooring saw, (1) 75540 4 3/8-inch 40T blade, self-aligning rip/miter fence, blade wrench, clamp, and push stick.

Cut flooring planks to size quickly and easily, right where you're working.

Related Products

• Skil 75540 4-3/8-Inch by 40T Carbide Flooring Blade
• QEP 10-26 Laminate Flooring Installation Kit with Tapping Block, Pull Bar and 30 Wedge Spacers
• Harmony 630-Square Foot Roll Underlayment
• Freud D0436X Diablo 4-3/8-Inch 36 Tooth ATB Cordless Trim Saw Blade with 20-Millimeter Arbor and 3/8-Inch Reducer Bushing
• Harmony 100-Square Foot Roll Underlayment